Wastewater Treatment Systems - page 27

• 27
Series - G Oil/Water Separators
feature an integral sand interceptor
compartment to permit sand and
gravel to settle out before the
wastewater enters the separation
chamber.
Series - J Oil/Water Separators
feature an integral effluent pump-out
compartment with level controls to
operate a pump at prescribed levels.
The pumped effluent can then be
routed through Highland's Advanced
Hydrocarbon Filtration System to
further improve performance.
Series - S Oil/Water Separators
feature an integral side product
compartment for storing separated oil.
The special side product compartment
permits the removal of only the
skimmed oil by pump-out. The effluent
is discharged either by pump or
gravity flow.
Series - TF Oil/Water Separators
feature an integral “trickle filter" to
remove dispersed and mechanically
emulsified oils that may pass through
the separator untreated. Water flows
freely out of the separator to the
diffusion pipe and passes through the
oleophilc trickle filter media bags to
remove any troublesome discharges.
The media bags can be easily removed
and replaced when necessary.
OUTLET
INLET
Level Sensor
OUTLET
END
INLET
Pump Lift
Chain & Rails
Bulkhead
Effluent
Discharge Pump
Pump Power
Supply
Oil Skimmer
OUTLET
INLET
Side Oil Storage
Compartment
Oil
Pump-out
Pipe
High Oil Sensor
OUTLET
INLET
Trickle Filter Media
Vent Fitting
High Water Sensor
Diffusion Pipe
Integral Sand Interceptor Compartment
1...,17,18,19,20,21,22,23,24,25,26 28,29,30,31,32,33,34,35,36,37,...58
Powered by FlippingBook